Production Operation Management

In: Business and Management

Submitted By VivianWaiYan
Words 298
Pages 2
EXECUTIVE SUMMARY — Despite a pressing need to do so, hospitals are struggling to improve efficiency, quality of care, and patient experience. Operational failures—defined as instances where an employee does not have the supplies, equipment, information, or people needed to complete work tasks—contribute to hospitals' poor performance. Such failures waste at least 10 percent of caregivers' time, delay care, and contribute to safety lapses. This paper seeks to increase hospital productivity and quality of care by uncovering organizational factors associated with operational failures so that hospitals can reduce the frequency with which these failures occur. The authors, together with a team of 25 people, conducted direct observations of nurses on the medical/surgical wards of two hospitals, which surfaced 120 operational failures. The team also shadowed employees from the support departments that provided materials, medications, and equipment needed for patient care, tracing the flow of materials through the organizations' internal supply chains. This approach made it possible to discover organizational factors associated with the occurrence and persistence of operational failures. Overall, the study develops propositions that low levels of internal integration among upstream supply departments contributed to operational failures experienced by downstream frontline staff, thus negatively impacting performance outcomes, such as quality, timeliness, and efficiency. Key concepts include:
• To avoid workarounds or the need to keep large stocks of materials on the units, managers should create a method for customer-facing employees to request and receive patient-specific supplies in a timely fashion.
• Employees are unlikely to discern the role that their department's routines play in operational failures, which hinders solution efforts.
• Failures and causes may be…...

Similar Documents

Management of Productions and Operations

...Competiveness, Strategy & Productivity Nicholas Deters Professor Ardy Management of Productions and Operations BSAB 420 11 December 2012 Abstract In our current society technological advancements, competitiveness, strategy and production are paramount in business relationships since technology advancements continue to gain momentum every day. Competition is what continues to enhance business strategy and production as companies strive to produce the latest technologically advanced product on the market while providing the best service for customer satisfaction at the lowest cost at with a high production rate. In the past few decades computer technology has been responsible for improved customer satisfaction and enhanced business production, spiking the level customer needs and competition between many businesses such as Ford vs. General Motors, Macintosh vs. Microsoft, UPS vs. FedEx, Import vs. Export as the list goes on forever. Whether the competition lie between an automotive industry or the computer industry, any company with a competitive advantage gains the ability to outperform its rivals, providing the ability for company growth and increased revenue. In the business aspect, competition continues to drive the market primarily by producing high quality products at a high output rate by using productivity and strategic road maps to aim for high goals and provide for further organizational achievements. Competitiveness, Strategy, & Productivity ...

Words: 2663 - Pages: 11

Production and Operations Management

...Production and Operation Management Cheng Guoping Chapter 1 Introduction 1. Production System 2. Production and operations in the organization 3. Function and jobs of POM 4. Decision Making in POM 5. The emergence of production and operation management 1. Production System Production and operation management (POM) is the management of an organization's production system, which converts input into the organization 's products and services. 1.1 Production system model Inputs conversions subsystem output External Legal/political Social Economic Technological External Legal/political Social Economic Technological Direct Outputs Products Services Direct Outputs Products Services Market Competition Product Information Customer Desires Market Competition Product Information Customer Desires Conversion Subsystem Conversion Subsystem Indirect Outputs Taxes Wages and salaries Technological Development Employee Impact Environment Impacts Social Impact Indirect Outputs Taxes Wages and salaries Technological Development Employee......

Words: 854 - Pages: 4

Production and Operations Management

...IIBM Institute of Business Management Subject Code-B-107 Examination Paper MM.100 Production and Operations Management Section A: Objective Type Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above Ans:- Inputs in to outputs 2. Continuous Production is: a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above Ans:- The first operation to the finished product 3. Independent demand is: a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above Ans:- Demand that is controlled by the company 4. Enterprise Resource Planning (ERP) has been defined as a: a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above Ans:- Complete Enterprise wide business solution 5. CAD stands for: a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above Ans:- Computer Aided Design 6. Delphi method is the most widely used and accurate method of: a. Demand forecasts b. Exponential forecasts c. Technological forecasts d. All of the above Ans:- Technological forecasts 7. JIT/Kanban systems help......

Words: 356 - Pages: 2

Production and Operations Management

...Production and Operations Management MM.100 Subject Code-B107 Section A: Objective Type & Short Questions (30 marks)  This section consists of multiple choice & Short Notes type questions.  Answer all the questions.  Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts Examination Paper of Production and Operations Management 2 IIBM Institute of Business Management c. Technological forecasts d. All of the above 7. JIT/Kanban systems help......

Words: 1422 - Pages: 6

Syllabus of Production and Operations Management

...UNIVERSITY BAGUIO CITY DEPARTMENT OF MANAGEMENT, MARKETING, AND ENTREPRENEURSHIP SYLLABUS MANAGEMENT 6 PRODUCTION AND OPERATIONS MANAGEMENT I. TITLE OF THE COURSE: Management 6 II. COURSE DESCRIPTIVE TITLE: Production and Operations Management III. COURSE CREDIT: Three (3) units IV. PRE-REQUISITE: Mgmt 1 and Math 4C V. COURSE DESCRIPTION: As a primary business function, along with marketing and finance, the production operations function plays a vital role in achieving the organization’s basic purpose for existence – to satisfy customer needs – by transforming resources into goods and services. Production operations management is important for two reasons: (1) it is the operations function that is primarily concerned with the production of goods and the provision of services, and (2) the operations function typically involves the greatest portion of the organization’s human resources and is responsible for a large portion of the firm’s capital assets. This course introduces the strategic and tactical decisions involved in production operations management. It focuses on the concepts and tools that are used in making decisions as well as trends and global best practices related to the planning and design, operation, and control of production operations systems. VI. COURSE OBJECTIVES: 1. To enable the students to develop a comprehensive understanding of the production/operations function and to appreciate......

Words: 613 - Pages: 3

Production and Operations Management

...Paper of Production and Operations Management 1 IIBM Institute of Business Management IIBM Institute of Business Management Examination Paper Production and Operations Management MM.100 Subject Code-B107 Section A: Objective Type & Short Questions (30 marks)  This section consists of multiple choice & Short Notes type questions.  Answer all the questions.  Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts Examination Paper of Production......

Words: 1445 - Pages: 6

Production and Operations Management

...Paper of Production and Operations Management 1 IIBM Institute of Business Management IIBM Institute of Business Management Examination Paper Production and Operations Management MM.100 Subject Code-B107 Section A: Objective Type & Short Questions (30 marks)  This section consists of multiple choice & Short Notes type questions.  Answer all the questions.  Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts Examination Paper of Production......

Words: 1445 - Pages: 6

Production and Operations Management

...Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations Management c.......

Words: 1445 - Pages: 6

Production and Operations Management

...Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations Management c.......

Words: 1445 - Pages: 6

Production and Operation Management

...Production and Operation Management Cheng Guoping Chapter 1 Introduction 1. Production System 2. Production and operations in the organization 3. Function and jobs of POM 4. Decision Making in POM 5. The emergence of production and operation management 1. Production System Production and operation management (POM) is the management of an organization's production system, which converts input into the organization 's products and services. 1.1 Production system model Inputs conversions subsystem output Feedback Feedback Figure 1 A production System Model 2. Common ground and differences between manufacturing and services 1.2.1 Common Ground: • Entail customer satisfaction as a key measure of effectiveness • Require demand forecasting • Require design of both the product and the process • Involve purchase of materials, supplies, and services • Require equipment, tools, buildings, and skills, etc. 1.2.2 Differences: • Customer contact Service involves a much higher degree of customer contact than manufacturing does. The performance of a service typically occurs at the point of consumption. Manufacturing allows a separation between production and consumption. • Uniformity of input Service operations are subject to more variability of inputs than manufacturing operations are. Each patient, each lawn, each TV presents a......

Words: 846 - Pages: 4

Production and Operations Management

...Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations Management c.......

Words: 1445 - Pages: 6

Production and Operation Management

...Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations Management c.......

Words: 1445 - Pages: 6

Production & Operation Management

...Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations Management c.......

Words: 1445 - Pages: 6

Production & Operations Management

... Using Teams in Production and Operations Management Marquita Jackson Dr. Laura Pogue Contemporary Business BUS 508 November 13, 2011 “Production and operations managers oversee the work of people and machinery to convert inputs into finished goods and services” (Boone 357). They must consider many factors such as taxes, employee needs, labor force skills and size, and economical transportations for materials and supplies, and the amount of energy services. These managers are responsible for planning the production process, selecting the most appropriate layout, implementing the production plan, and controlling the production process. Managers are also responsible for maintaining quality control and ensuring that goods or services that they provide meet the customers expectations (Boone 2011). General Electric is a major household brand that revamped and reformed their production and operations management. In 1890, Thomas Edison established the Edison General Electric Company to be able to bring together his various businesses. During that same period, a competitor company, Thomson-Houston Company, became a dominant innovation company. As both businesses expanded and grew it became more difficult for both companies to produce complete electrical installations relying solely on their own patents and technologies. In 1892, the two companies merged together and created a new organization called the General Electric Company. The first General Electric Appliance was an electric...

Words: 1794 - Pages: 8

Production and Operations Management

...Production and Operations Management The Business Enterprise-BUS508 Dr. John Woodard Tammy English Strayer University August 11, 2011 Marathon is an integrated international energy company engaged in exploration and production; oil sand mining; integrated gas; and refining, marketing, and transportation operation. Marathon is among the top five crude oil refineries in the United States, so surely there is a way to reduce the time involved in the production process. The major crude oil refineries in the United States are located in the hurricane region of the gulf coast. One possible option that Marathon could take to reduce the time involved in the production process would be to create new petroleum refineries in different regions allowing operators to shift process and production responsibilities in the event of a natural disaster or scheduled outage. There may be one feasible alternative as to why Marathon would want to reduce the time in the production of the petroleum products. In order to produce gasoline, the crude oil must go through the refinery and transportation processes. In those processes sometime could be saved either by increasing the speed of separation in the crude oil refinery process or by increasing the speed in the transportation process. Crude Oil, like any other product, is traded on the world market. In recent times, crude oil prices have been rocketing, driven by rising global demand and political instability in several oil...

Words: 1013 - Pages: 5